Installation Blok | Smart Tiles

1. Clean the surface with a degreasing agent such as TSP.

2. Mark your wall with a leveled line at the height of the 1st row of tiles to mark where the top of your tile will line up to.

3. Apply the first tile making sure it follows well the leveled line. The first tile is the most important one to install correctly.

4. Remove the protective film from the back of your tile and apply the tile to your wall on the horizontal line that you marked.

5. Apply one tile after another assuring that the tiles are straight and overlapped.

6. After 48 hours, your Smart Tiles have now become permanently applied to the wall. All you have to do now is sit back and enjoy!

Note : The letters/numbers on the Smart Tiles are for manufacturing purposes only. To determine the desired pattern, we recommend arranging the tiles on the counter before installing them on the wall. When aligning your tiles, make sure to overlap the letters/numbers along the grout lines to ensure they are not apparent.

About our Smart Adhesive : Our specially engineered adhesive doesn't feel sticky? That's simply because it isn't meant to stick to your skin! We formulated it so it allows you to reposition the tiles during installation and it will set firmly onto the wall within 48 hours after being stuck to you surface. So as much as it is possible, do not touch the adhesive with your fingers while installing, press firmly once the tile is in the right spot and you'll be set for years of enjoyment with your new decor!

Video Tips

Current video: What To Do Before Installing Smart Tiles